How to make Mikrotik have proper NAT Loopback or NAT Hairpin, in this guide show to setup IPv4 Firewall Rules Default By default, must have…
Leave a CommentAuthor: anime4000
⚠️ Disclaimer: This guide is for educational and network troubleshooting purposes only. Do not capture or use credentials you don’t own or have permission to…
Leave a Comment
Most CAKE guides assume a plain Ethernet uplink, but GPON works just as transparently — so you can treat it like a normal Linux CAKE…
Leave a Comment
This guide applicable newer model of Mikrotik such as CRS3xx, CCR2xxx and RB5009 If you have VLAN that need to translate or swap to different…
Leave a Comment
I own a MikroTik RB5009 and subscribe to a 2Gbps fiber plan (with 1Gbps upload) using a GPON SFP ONU Stick (NIJIKA). This setup replaces…
Leave a Comment
I wondering how good H.266 codec, for this I use uvg266 ultravideo (v0.8.1) Size Comparison H.266 (uvg266 ultravideo) USAC xHE-AAC eSBR 11.4 MiB (11,988,630 bytes)…
Leave a CommentMake your seedbox faster seeding to other peers, follow these settings if you plan to create own seedbox server VM Specification Description Value Info vCPU…
Leave a Comment
Introduction Fine-tuning large-scale generative models like Stable Diffusion 1.5 using DreamBooth requires meticulous calibration of hyperparameters, particularly the learning rate (LR) schedule. An optimal LR…
Leave a Comment
By default, Jellyfin FFmpeg -analyzeduration is default to 1G (1GB) which is absurd for Live TV streams. To fix this, login to your Jellyfin Server,…
Leave a Comment
IMSProg is a versatile programmer for I²C, MicroWire, and SPI EEPROM/Flash chips, utilizing the CH341A programmer device. Renowned within the Linux community for its robustness…
Leave a Comment